Short Delay FPV Goggles Single Antenna HDMI 5.8 G Helmet , High Resolution TFT LCD 0.32 Inch FPV Video Glasses For UAV
UAVs generally refer to the drones with cameras, and those without cameras can only be regarded as toys. It is generally divided into two parts, one part is the remote control, the other part is the display part which is completed by the image transmission module. The signal transmitter is connected to the camera on the drone, and the signal receiver is in the hands of the player, and some are on the remote controller. Signal receive generally needs WIFI and 5.8GHZ radio signal, but the distance of WIFI is relatively not far, the player can use mobile phone to receive signals, but it will not be clear in the outdoor; and the 5.8GHZ radio signal, the distance can reach 2KM. It is best if within a few hundred meters, so most drones use 5.8GHZ radio signal.
Product details
Product model | E632 |
CPU | E6 |
Memory | Flash: 256K |
Screen material | TFT LCD |
Screen Quantity | One screen |
Screen size | 0.32" |
Screen resolution | 854*480 |
5.8G receiver | Yes |
HDMI | Support HDMI input |
Channles | 40CH |
Delay | less than 30ms |
RF Modules | 5.8G, 5.0G, 2.4G |
Power Consumption | HDMI Mode:1.5W, 5.8G Mode:2.3W |
Lens Material | Resin |
Outer Cover Material | PC+ABS |
Battery | Built-in 2000 mAh rechargeable Li-battery |
1. Indicator Light: ● Turn blue after power on
● Turn red when charging. Turn blue when full charged
2. Power: ● Long press for 3 seconds to turn power on/ off
3. Return/Record:● Press to return the previous page
● Long press for 3 seconds to enter the recording mode, and Long press to stop recording
4. Setting/PLA : ● Press when in AV In or 5.8G mode to switch between PLA and NTST
● Press to enter setting when in other mode
5. Left/Volume: ● Press to enter the left menu
● Long press to increase the volume
6. Right/Volume-: ● Press to enter the right menu
● Long press to lower the volume
7. OK/CH: ● Press to confirm/ enter
● Long press for 5 seconds in AV IN/ 5.8G mode to start to search channels automatically
8. Reset: ● Force to power off when not in external power supply
● Force to restart when in external power supply
9. TF Card: ● Insert TF card
10. USB Port: ● Connect external power to charge via USB cable
● Transmit data via USB cable
11. AV inport: ● Connect device with AV OUT
12. Earphone: ● Connect external 3.5MM earphone
Applications
It can be used:
1. Unmanned Aerial Vehicle
2. Monitor
3. Fishing camera
4. Navigator
5. Engineering Instrument
6. PSP
7. Radio control cars
8. Night vision
Tag: Helmet, FPV Drone Goggles, FPV Video Glasses.