2.1 Inch IPS 68 Degress FOV Head Mounted Display With HDMI & Micro USB
Support 2 speakers, both sides inside of glasses
After turning on the smart control host, connect the HDMI output device via HDMI cable, and connect the USB interface to the DC5V
power supply, and the 3D glasses can display normally.
Unplug the HDMI and USB cables, the 3D glasses will shut down.
If you need to switch 3D, press the 2D/3D switch button to switch between 2D/3D.
This product comes with dual directional sound speakers, you can listen to the sound normally after wearing it. Supports external 3.5mm headphone. Plug in the headphone to automatically switch the sound to the headphone.
Diopter adjustment (0-700°)
First remove the magnetic eye mask, turn the diopter adjustment knob (each scale corresponds to 100 degrees of myopia), adjust the left and right eyes to the corresponding degrees, and then put on the glasses to make fine adjustments to make the left and right eyes see the image clearly . Then put on the magnetic eye mask and start using it.