HD High Resolution Monocular 0.23 Inch 21° Diagonal SPI Micro Display Modules For Microscope
This micro display module consists of an OLED screen and an optical prism. It is mainly used for augmented reality virtual near-eye display and is a penetrating auxiliary information display device.
Virtual screen size
640(RGB) x 400 dots
This OLED display module has high resolution (640*400), It has rich shows details and clear viewing.
The module adopts optical waveguide technology, which has the advantages of high resolution, large FOV (Field of View) and high transmittance.
The module is thin and light. The thickness of the lens is 10mm.
The interface of drive board is TYPE-C. If other interfaces are needed, we can provide customization.
Luminance and White Balance Preset Mode
This product has 5 luminance and white balance preset modes.
By selecting the mode according to the register LUMINNACE, the luminance and the white chromaticity are adjusted to preset value.
Operate in a clean environment.
Do not touch the panel surface. The surface is easily scratched. When cleaning, use a clean-room wiper with isopropyl alcohol. Be careful not to leave stains on the surface.
Use ionized air to blow dust off the panel surface.
Do not hold the flexible board or twist or bend it because the flexible board connection block is easily affected by twisting.
The minimum fold radius of the flexible board is 1 mm.
Do not drop the panel.
Do not twist or bend the panel.
Keep the panel away from heat sources.
Do not dampen the panel with water or other solvents.
Do not store or use the panel (module) at high temperatures or high humidity, as this may affect the characteristics.
When disposing of this panel, handle it as industrial waste and comply with related regulations.
Do not store or use the panel in reactive chemical substance (including alcohol) environments, as this may affect the performance.
This panel is delivered packed in a degassed aluminum laminated bag. When storing this panel after unsealing the bag, put it into the aluminum laminated bag again and seal it with tape with the opening folded after inserting desiccants.